The project for the manufacture of a hydraulic hydraulic die for a pipe tip Ф48-20mm with a wall of 3-2mm (ПШГ-НТ48-20х3-2) - This is a three-phase stamp - three in one: 1 phase - at this stage the pipe is flattened 2 phase - after the completion of the first phase, and even slightly simultaneously with the first phase, the hole is cut down. 3 phase - begins cutting along the length, and trimming the contour of the pen, and in parallel there is a punching of the used washer along the channel of the stamp. On one approach - the manufacture of one tip, it takes 7 seconds - this is the estimated time of the net work of the three phases in total. The line itself consists of the following components: 1. Press stamp 2. A hydraulic cylinder of 30 tons with a pressure gauge with a scale in tons. 3. High pressure hose 700 bar (700 atmospheres 70 MPa) and pressure gauge. 4. Oil station (oil pump) at 700 bar with a manometer in MPa. 5. The table. 6. Rail guide for stop. 7. Ruler for quick readjustment of rib length.
]]>The diameter of the dome is 6m. 2 frequency breakdown of the frame.
It can be useful as a shelter for a cafe, summer terrace, summer kitchen, garage. It is possible to build as modules. This project is designed in a such way that any person, who does not understand anything in construction can understand and assemble this structure. This project is more similar to the assembly manual (on 36 sheets!) - it has many color, clear pictures, and comments.
]]>Inside view:
1st floor. Hallway, stairs http://pnr.ma/csRMrt
2nd floor. Hall http://pnr.ma/dUNLao
2nd floor. Under the tower http://pnr.ma/elNsOU
2nd floor. Kitchen http://pnr.ma/cjGgjo
2nd floor. Bathroom http://pnr.ma/eNhSvr
3nd floor. Observation tower http://pnr.ma/akfMOQ
These are links to a full review. There you need to twist the mouse.
The diameter of the dome is 10m; 4 frequency breakdown of the frame; 5/8 parts of the sphere The floor area is 111 sq.m. The project of a private house, for individual living, with the ability to add a viewing tower and assemblies as modules. This project is designed in a such way that any person, who does not understand anything in construction can understand and assemble this structure. This project is more like a manual for the assembly - it has many color, clear pictures, and comments. Few videos of dome frame https://www.youtube.com/watch?v=41WyB7XlI6M
The project was drawn up in Russian. If you need a translation, it will cost + 300 euros and several weeks of time.]]>The diameter of the dome is 14m; 4 frequency breakdown of the frame; 5/8 parts of the sphere. breakdown of the sphere - "Yardome" The area of the floor is 231 sq.m. + The terrace and balcony area is 74 sq.m. The project of a private house for individual living, with three floors. This project is designed in a such way that any person, who does not understand anything in construction can understand and assemble this structure. This project is more like a manual for the assembly - it has a lot of color, clear pictures. Link to the animation https://www.youtube.com/watch?t=4&v=uha1KWb-9Qk
]]>The diameter of the dome is 12m. 2 frequency breakdown of the frame. It can be useful as a shelter for a cafe, summer terrace, summer kitchen, garage. It is possible to build as modules. This project is designed in a such way that any person, who does not understand anything in construction can understand and assemble this structure. This project is more similar to the assembly manual (on 40 sheets!) - it has many color, clear pictures, and comments.
]]>